Technology

Sales & Engineering Departments
  • Barcode Interface
  • Computerized Production Planning System
  • Computerized Sales Management System
  • SI 6000b Controlled Impedance Design System
CAM Department
  • 3 Orbotech Genesis 2000 CAM Stations
  • 3 CAM350 Stations
  • EIE RP362-DL Auto Loader Raster Photoplotter
  • Glunz & Jensen 28" Film Processor
Programming, Drilling & Fabrication Departments
  • Ceco Hole Checker 8 Auto Inspection
  • Multiline XRT System 7000™ X-ray Post Lamination
  • Tooling and Inspection
  • 1 Excellon Concept 129 w/ built-in X-ray camera (180k RPM)
  • 1 Excellon 689 six spindle (180k RPM)
  • 3 Excellon Mark VII Drillers
  • Excellon Mark VI Driller/Router
  • Excellon EX 200 Driller/Router
  • 2 Excellon Mark V Driller/Routers
  • Laser Micrometer
  • Accuscore Scoring Machine
  • Automatic Stacking Machine
  • Glenbrook Real-Time X-ray
  • DNC File Server
  • Bevelers, Edgemate, Shear Machine
  • Plasma Etchback (March Plasma Systems)
Dry Film & Photo Departments
  • Maskless Lithography Direct Digital Imaging System
  • Multiline Semi-Automatic Artwork Punch
  • Multiline Automatic Post-Etch Punching of Inner Layers
  • 4 Multiline Glass Phototools
  • 2 ORC Exposure Units 5kW
  • 2 Hakuto Mach 610I Auto Cut-Sheet Laminators
  • 3 Western Magnum Substrate Cleaner Lines
  • Chemcut 547 Semi-Automatic Developer
Plating Department

Our revolutionary Direct Impingement copper plating line designed and built by Environmental Compliance is a one-of-a-kind. Direct Impingement Plating is also known as a Push/Pull system. From one side we are pushing electrolytes through the hole and from other side it is being pulled. This prevents the hole from starvation of electrolytes and consequently we are able to plate evenly through the entire hole. In addition, with our Direct Impingement line there is no dog-bone plating and therefore no copper blow-outs in the center of the hole.

Some of the special capabilities with Direct Impingement copper plating line are:

  • 20:1 Aspect Ratio and Higher
  • Pattern Plate 3 mil Lines/spacing 4
  • 1:1 Surface to Hole in Pattern Plating
  • 1:1.3 Surface to Hole in Panel Plating
  • Blind Via Plating Conformed to the Wall .37 Deep
  • Blind Via .002 mil Diameter
  • Uniform Quality Plating

Additional Plating Equipment:

  • March Plasma System
  • Potassium Permanganate De-Smear Line
  • Semi-Automatic Electroless Copper Line
  • 1 1500 gallon Dual Rectification Electroplating Copper Tank
  • 2 1000 Gallon Electro Plating Eductor Copper Tanks
  • 1000 Gallon Tin Tank
  • Chemcut Semi-Automatic Conveyorized Oxide Line
  • Chemcut Semi-Automatic Conveyorized Dryfilm Chem
  • Chemcut
    • Inner Layer Clean Line
    • DES (develop/etch/strip)
    • Oxide Replacement
    • Film Stripper
    • Ammonia Etcher
    • Tin Stripper
  • Semi-Automatic Stripping Line
  • Chemcut Semi-Automatic Conveyorized Etching Machines
  • Chemcut Semi-Automatic Conveyorized Tin Stripper
  • Technic Auto Gold Line
  • Double-Sided Scrubber/Deburrer Dryer Units
  • Cemco Pre-Clean and Flux Coater
  • Quick Silver SM Hot Air Solder Coater Machine
  • Marseco Semi-Automatic Post Cleaner System
  • Kenetic Ionic Exchange Fully Automated Computerized Wastewater Treatment System
  • Vertical Cemco Hot Air Leveler
  • Immersion Silver Plating Line
Multilayer Lamination Department
  • 2 Fully Automated TMP Four Opening Vacuum Lamination Presses
  • 2 TMP Cold Presses
  • Complete Multiline Registration System
  • Multiline De-Pinner
  • Ceco Overarm Digital Micrometer
Soldermask/Silkscreen Departments
  • DP-1500-2X Dual-Sided LPI Soldermask Coater
  • Orbotech Inkjet Legend Printer
  • TC-150 Conveyorized Oven
  • 2 TC-120 Conveyorized Ovens
  • Olec AP30CL-8000 Super Eight Exposing Unit
  • NuArc Flip Top 4K
  • Grieve SC-350 82" x 64" x 32" Oven
  • Proheatco 82" x 64" x 42" Oven
  • Chemcut 547 Semi-Automatic Developer
  • 3 24" x 30" Screen Tables
  • 24" I.S. Pumice Scrubber Dryer
  • Western Magnum Substrate Clean Line
  • Complete Load and Unload System
  • Circuit Automation DP-VDM Vacuum System
Quality Control Department
  • Polar Instruments CITS 500s Controlled Impedance (TDR) Test System
  • 3 ATG A5 Flying Probe Test Systems (Netlist Test)
  • 3 Camtek Orion 604 WR (AOI)
  • Camtek Orion 868 (AOI)
  • Buehler Cross-Section Laboratory
  • Gerber 20/20 Automatic Optical Inspection (AOI)
  • Fastek Bare Board Tester Model 110
  • Microscope with Digital Capture
  • Accu-scope Microscope
  • CMI PTX Series for Measuring Copper Thickness
  • CMI 900 XRF for Coating Thickness Measurement
  • YSC Digital Video Microscope
  • Nikon Sm2-10 Zoom Microscope
  • MicroDerm 500 for Measuring Gold/Nickel Thickness
  • Complete Chemical Analysis Laboratory
  • CVS Unit Including Automatic Chemical Analysis
  • Buck Scientific AA (Atomic Absorption) Spectrophometer
  • Thermo Spectronic 20d+ Spectrometer
  • Keaco Omega Meter 600R Iconograph

Contact Details

  • Address: 2071 Wineridge Place, Escondido, CA 92029, USA

  • Phone: +1 760 489 1413

  • Email: info@uscircuit.com